regerror(3c) 맨 페이지 - 윈디하나의 솔라나라




     regcomp, regexec, regerror,  regfree  -  regular  expression

     #include <sys/types.h>
     #include <regex.h>

     int regcomp(regex_t *restrict preg, const char *restrict pattern,
          int cflags);

     int regexec(const regex_t *restrict preg,
          const char *restrict string, size_t nmatch,
          regmatch_t pmatch[restrict], int eflags);

     size_t regerror(int errcode, const regex_t *restrict preg,
          char *restrict errbuf, size_t errbuf_size);

     void regfree(regex_t *preg);

     These functions interpret basic and extended regular expres-
     sions (described on the regex(5) manual page).

     The structure type regex_t contains at least  the  following

     size_t re_nsub
                       Number of parenthesised subexpressions.

     The structure type regmatch_t contains at least the  follow-
     ing members:

     regoff_t rm_so
                       Byte offset from start of string to  start
                       of substring.

     regoff_t rm_eo
                       Byte offset from start of  string  of  the
                       first  character  after  the  end  of sub-

     The regcomp() function will compile the  regular  expression
     contained  in  the string pointed to by the pattern argument
     and place the results in the structure pointed to  by  preg.

     The  cflags  argument is the bitwise inclusive OR of zero or
     more of the following flags, which are defined in the header

                     Use Extended Regular Expressions.

                     Ignore case in match.

                     Report only success/fail in regexec().

                     Change the handling of  NEWLINE  characters,
                     as described in the text.

     The default regular expression type for pattern is  a  Basic
     Regular  Expression.  The  application  can specify Extended
     Regular Expressions using the REG_EXTENDED cflags flag.

     If the REG_NOSUB flag was not set in cflags, then  regcomp()
     will  set  re_nsub to the number of parenthesised subexpres-
     sions (delimited by \(\) in basic regular expressions or  ()
     in extended regular expressions) found in  pattern.

     The regexec() function compares the  null-terminated  string
     specified  by  string  with  the compiled regular expression
     preg initialized by a previous call to regcomp(). The eflags
     argument  is the bitwise inclusive OR of zero or more of the
     following flags, which are defined in the header <regex.h>:

                   The first character of the string  pointed  to
                   by  string  is  not the beginning of the line.
                   Therefore, the circumflex character (^),  when
                   taken  as  a special character, will not match
                   the beginning of string.

                   The last character of the string pointed to by
                   string  is not the end of the line. Therefore,
                   the dollar sign ($), when taken as  a  special
                   character, will not match the end of string.

     If nmatch is zero or REG_NOSUB was set in the  cflags  argu-
     ment  to  regcomp(),  then  regexec() will ignore the pmatch
     argument. Otherwise, the pmatch argument must  point  to  an
     array with at least nmatch elements, and regexec() will fill
     in the elements of that array with offsets of the substrings
     of  string  that  correspond to the parenthesised subexpres-
     sions of pattern: pmatch[i].rm_so will be the byte offset of
     the  beginning  and pmatch[i].rm_eo will be one greater than
     the byte offset of the end of substring i. (Subexpression  i
     begins  at  the  ith matched open parenthesis, counting from
     1.)  Offsets  in  pmatch[0]  identify  the  substring   that
     corresponds  to  the  entire regular expression. Unused ele-
     ments of pmatch up to pmatch[nmatch-1] will be  filled  with
     -1.  If there are more than nmatch subexpressions in pattern
     (pattern itself counts as a subexpression),  then  regexec()
     will  still  do  the  match,  but will record only the first
     nmatch substrings.

     When matching a basic or extended  regular  expression,  any
     given  parenthesised subexpression of pattern might partici-
     pate in the match of several different substrings of string,
     or  it might not match any substring even though the pattern
     as a whole did match. The following rules are used to deter-
     mine which substrings to report in pmatch when matching reg-
     ular expressions:

           If subexpression i in a regular expression is not con-
           tained  within  another subexpression, and it partici-
           pated in  the  match  several  times,  then  the  byte
           offsets in pmatch[i] will delimit the last such match.

           If subexpression i is  not  contained  within  another
           subexpression, and it did not participate in an other-
           wise successful match, the byte offsets  in  pmatch[i]
           will  be  -1.  A subexpression does not participate in
           the match when:

           * or \{\}  appears immediately after the subexpression
           in  a basic regular expression, or *, ?, or {} appears
           immediately after the  subexpression  in  an  extended
           regular  expression,  and  the  subexpression  did not
           match (matched zero times)


           | is used in an extended regular expression to  select
           this  subexpression  or  another, and the other subex-
           pression matched.

           If subexpression i is contained within another  subex-
           pression  j,  and  i is not contained within any other
           subexpression that is contained within j, and a  match
           of  subexpression j is reported in pmatch[j], then the
           match or non-match  of  subexpression  i  reported  in
           pmatch[i] will be as described in 1. and 2. above, but
           within the substring reported in pmatch[j] rather than
           the whole string.

           If subexpression i is contained  in  subexpression  j,
           and  the  byte  offsets  in pmatch[j] are -1, then the
           pointers in pmatch[i] also will be -1.

           If subexpression i matched a zero-length string,  then
           both byte offsets in pmatch[i] will be the byte offset
           of the character or NULL terminator  immediately  fol-
           lowing the zero-length string.

     If, when regexec() is called, the locale is  different  from
     when  the  regular  expression  was  compiled, the result is

     If REG_NEWLINE is not set in cflags, then a NEWLINE  charac-
     ter  in  pattern  or  string  will be treated as an ordinary
     character. If REG_NEWLINE  is  set,  then  newline  will  be
     treated as an ordinary character except as follows:

           A NEWLINE character in string will not be matched by a
           period  outside a bracket expression or by any form of
           a non-matching list.

           A circumflex (^) in  pattern,  when  used  to  specify
           expression anchoring will match the zero-length string
           immediately after a newline in string,  regardless  of
           the setting of REG_NOTBOL.

           A dollar-sign ($) in pattern,  when  used  to  specify
           expression   anchoring,  will  match  the  zero-length
           string immediately before a newline in string, regard-
           less of the setting of REG_NOTEOL.

     The  regfree()  function  frees  any  memory  allocated   by
     regcomp() associated with preg.

     The following constants are defined as error return values:

                     The regexec() function failed to match.

                     Invalid regular expression.

                     Invalid collating element referenced.

                     Invalid character class type referenced.

                     Trailing \ in pattern.

                     Number in \digit invalid or in error.

                     [] imbalance.

                     The function is not supported.

                     \(\) or () imbalance.

                     \{ \} imbalance.

                     Content of \{  \}  invalid:  not  a  number,
                     number  too  large,  more  than two numbers,
                     first larger than second.

                     Invalid endpoint in range expression.

                     Out of memory.

                     ?, * or +  not  preceded  by  valid  regular

     The regerror() function provides a mapping from error  codes
     returned by regcomp() and regexec() to unspecified printable
     strings. It generates a string corresponding to the value of
     the  errcode argument, which must be the last non-zero value
     returned by regcomp() or regexec() with the given  value  of
     preg. If errcode is not such a value, an error message indi-
     cating that the error code is invalid is returned.

     If preg is a NULL pointer, but errcode is a  value  returned
     by a previous call to regexec() or regcomp(), the regerror()
     still generates an error string corresponding to  the  value
     of errcode.

     If the errbuf_size argument is  not  zero,  regerror()  will
     place   the   generated  string  into  the  buffer  of  size
     errbuf_size bytes  pointed  to  by  errbuf.  If  the  string
     (including  the  terminating NULL) cannot fit in the buffer,
     regerror() will truncate the string and  null-terminate  the

     If errbuf_size is zero, regerror() ignores the errbuf  argu-
     ment,  and returns the size of the buffer needed to hold the
     generated string.

     If the preg argument to regexec() or regfree() is not a com-
     piled  regular  expression returned by regcomp(), the result
     is undefined. A preg is no longer treated as a compiled reg-
     ular expression after it is given to regfree().

     See regex(5) for BRE (Basic Regular Expression) Anchoring.

Return Values
     On successful completion, the regcomp() function returns  0.
     Otherwise,  it  returns an integer value indicating an error
     as described in <regex.h>, and the content of preg is  unde-

     On successful completion, the regexec() function returns  0.
     Otherwise  it  returns  REG_NOMATCH to indicate no match, or
     REG_ENOSYS to indicate that the function is not supported.

     Upon successful completion, the regerror() function  returns
     the  number  of  bytes  needed  to hold the entire generated
     string. Otherwise, it returns 0 to indicate that  the  func-
     tion is not implemented.

     The regfree() function returns no value.

     No errors are defined.

     An application could use:

     regerror(code,preg,(char *)NULL,(size_t)0)

     to find out how big a buffer is  needed  for  the  generated
     string,  malloc  a  buffer to hold the string, and then call
     regerror() again to get the string (see malloc(3C)).  Alter-
     nately, it could allocate a fixed, static buffer that is big
     enough to hold most strings, and then use malloc() to  allo-
     cate a larger buffer if it finds that this is too small.

     Example 1 Example to match string against the extended regu-
     lar expression in pattern.

       #include <regex.h>
       * Match string against the extended regular expression in
       * pattern, treating errors as no match.
       * return 1 for match, 0 for no match

       match(const char *string, char *pattern)
             int status;
             regex_t re;
             if (regcomp(&re, pattern, REG_EXTENDED|REG_NOSUB) != 0) {
                  return(0);      /* report error */
             status = regexec(&re, string, (size_t) 0, NULL, 0);
             if (status != 0) {
                   return(0);      /* report error */

     The following demonstrates how the REG_NOTBOL flag could  be
     used  with  regexec()  to find all substrings in a line that
     match a pattern supplied by a user. (For simplicity  of  the
     example, very little error checking is done.)

       (void) regcomp (&re, pattern, 0);
       /* this call to regexec() finds the first match on the line */
       error = regexec (&re, &buffer[0], 1, &pm, 0);
       while (error == 0) {     /* while matches found */
               /* substring found between pm.rm_so and pm.rm_eo */
               /* This call to regexec() finds the next match */
               error = regexec (&re, buffer + pm.rm_eo, 1, &pm, REG_NOTBOL);

     See attributes(5) for descriptions of the  following  attri-

     tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i)  ATTRI-
     BUTE   TYPEATTRIBUTE   VALUE   _   CSIEnabled   _  Interface
     StabilityCommitted  _  MT-LevelMT-Safe  with  exceptions   _
     StandardSee standards(5).

See Also
     fnmatch(3C),  glob(3C),  malloc(3C),  setlocale(3C),  attributes(5),
     standards(5), regex(5)

     The regcomp() function can be used safely in a multithreaded
     application  as long as setlocale(3C) is not being called to
     change the locale.
맨 페이지 내용의 저작권은 맨 페이지 작성자에게 있습니다.