proftpd(8) 맨 페이지 - 윈디하나의 솔라나라

개요

섹션
맨페이지이름
검색(S)

proftpd(8)

Name
     proftpd - Professional configurable,  secure  file  transfer
     protocol server

Synopsis
     proftpd [ -hlntv ] [ -c config-file ] [ -d debuglevel ] [ -p
     0|1 ]

Description
     proftpd is the Professional  File  Transfer  Protocol  (FTP)
     server  daemon.   The  server may be invoked by the Internet
     "super-server" inetd(8) each time a connection  to  the  FTP
     service  is  made, or alternatively it can be run as a stan-
     dalone daemon.

     Each successful and failed ftp(1) session  is  logged  using
     syslog  with  a facility of LOG_FTP.  Note: LOG_FTP messages
     are not displayed by syslogd(8) by default, and may have  to
     be enabled in syslogd(8)'s configuration file.

     When proftpd is run in standalone mode  and  it  receives  a
     SIGHUP then it will reread its configuration file.  When run
     in standalone mode without the -n option, the  main  proftpd
     daemon       writes       its       process       ID      to
     /usr/local/proftpd/var/proftpd.pid to make it easy  to  know
     which process to SIGHUP.

Options
     -h,--help   Display a short usage description, including all
                 available options.

     -n,--nodaemon
                 Runs the  proftpd  process  in  standalone  mode
                 (must be configured as such in the configuration
                 file), but does not background  the  process  or
                 disassociate it from the controlling tty.  Addi-
                 tionally, all output (log or debug messages) are
                 sent  to  stderr, rather than the syslog mechan-
                 ism. Most often used  with  the  -d  option  for
                 debugging.

     -q,--quiet  Quiet mode; don't send  logging  information  to
                 standard error when running with the -n option.

     -v,--version
                 Displays  the  version  number  of  ProFTPD   to
                 stdout.

     -D,--define parameter
                 Sets a configuration parameter which can be used
                 <IfDefine>...</IfDefine>  sections in the confi-
                 guration files to conditionally skip or  process
                 commands.

     -d,--debug debuglevel
                 Sets proftpd's internal  debug  level  (normally
                 0).   The  debuglevel should be an integer value
                 from 0 to 10, with higher numbers producing more
                 debug output.  Normally, debug messages are sent
                 to syslog using the DEBUG facility,  however  if
                 the  -n  option is used, all such output is sent
                 to stderr.

     -c,--config config-file
                 Specifies an alternate config-file to be  parsed
                 at  startup,  rather than the default configura-
                 tion file.  The default  configuration  file  is
                 /usr/local/proftpd/etc/proftpd.conf

     -N,--nocollision
                 Disables address/port collision checking.

     -S,--serveraddr
                 Specifies an IP address for  the  host  machine,
                 avoiding an DNS lookup of the hostname

     -t,--configtest
                 Read the configuration file, report  any  syntax
                 errors, and exit.

     -p,--persistent 0|1
                 Disables (0) or enables  (1)  the  default  per-
                 sistent password support, which is determined at
                 configure time for each platform.   This  option
                 only  affects  the default support, it can still
                 be  overridden  at  run-time   with   the   Per-
                 sistentPasswd directive.

     -l,--list   Lists all modules compiled into proftpd.

     -V,--settings
                 Displays  various  compile-time   settings   and
                 exits.

     -X,--nofork Debug mode (do  not  fork  a  session  process);
                 exits after one session.

     -4,--ipv4   Support IPv4 functionality only,  regardless  of
                 whether  the  --enable-ipv6 configure option was
                 used.

     -6,--ipv6   Support IPv6  connections  and  lookup  of  IPv6
                 addresses for server DNS names.  This is enabled
                 by  default,  if  the  --enable-ipv6   configure
                 option is used.

Files
     /usr/local/proftpd/sbin/proftpd
     /usr/local/proftpd/etc/proftpd.conf
     /usr/local/proftpd/bin/ftpwho
     /usr/local/proftpd/bin/ftpcount
     /usr/local/proftpd/bin/ftptop
     /usr/local/proftpd/sbin/ftpshut
     /etc/ftpusers
     /var/log/xferlog
     /usr/local/proftpd/var/proftpd.pid
     /usr/local/proftpd/var/proftpd.scoreboard

Authors
     ProFTPD is written and maintained by  a  number  of  people,
     full        credits        can       be       found       on
     http://www.proftpd.org/credits.html

See Also
     proftpd.conf(5),inetd(8),ftp(1),ftpwho(1),ftpcount(1),ftpshut(8)

     Full  documentation  on ProFTPD, including configuration and
     FAQs, is available at http://www.proftpd.org/

     For help/support, try the ProFTPD mailing lists, detailed on
     http://www.proftpd.org/lists.html

     Report bugs at http://bugs.proftpd.org/
맨 페이지 내용의 저작권은 맨 페이지 작성자에게 있습니다.
RSS ATOM XHTML 5 CSS3